India Flag         Kazakhstan Flag         Russia Flag

Coal Briquetting Machine


Coal Briquetting Machine

Coal briquetting is used for pressing coal fines into pieces of geometrically regular and uniform shapes. Coal after being briquetted are energy saving, environmental friendly, easy to transport and improved in wastes recycling time, which make it have good economic and social benefit. The coal briquetting machine can save energy and protect the environment.

Coal Briquetting is done either with a binder at intermediate pressures and without binders at high pressures. Briquettes of different shapes (Round/square/hexagon) can be prepared by this Coal Briquetting machine. The performance of the coal briquetting machine mainly depends on the roller of the main engine which is made of 65 manganese.

  • Coal Briquetting Machine
  • Coal Briquetting Machines

Processes involved in a Coal Briquetting Machine

Mixing is the first stage in which, a wheel mill machine is a really sensible mixing device for one can service several purposes. It has not only the function of mixing coal powder with liquid binder as usual mixer, but also can press to increase the density of coal dust, so that the final briquettes can be very hard and with good strength.

Briquetting is the next stage, where the coal powder along with the binder is pressed and formed into definite shapes called briquettes.

Drying is the last step of making coal briquettes; it is used for drying the final briquettes which have 15-20 % water content due to the liquid binder.

Advantages:
  • Sturdy structure.
  • High quality material of construction.
  • Employs advanced operating technology.
  • Provides maximum profitable output from the low cost input raw material.
  • Increases the calorific value for per unit volume of the briquette prepared.
  • Smokeless, non-smelly and non-chemical production functionality.
  • Raw material fall onto the rollers for further processing without encountering obstacles in between.
  • The raw materials are pressed into definite shape by the pressure of the two rollers.
  • Suitable to be used within, small, medium or large industrial establishments.
Technical Specification:
Model STCB 1 STCB 2 STCB 3 STCB 4
Production Capacity 10-20 TPH 20-30 TPH 30-40 TPH 40-50 TPH
Width of the roller 350 mm 380 mm 450 mm 550 mm
Diameter of the roller 650 mm 750 mm 850 mm 850 mm
Power 30 kw 35 kw 37 kw 45 kw
Mode of Operation Punching press Punching press Punching press Punching press
Speed of main shaft 15 - 17 r/min 15 - 17 r/min 14 - 16 r/min 14 - 16 r/min
Type of pressure Hydraulic Hydraulic Hydraulic Hydraulic
Material of roller 65Mn 9Cr 2Mn 65Mn 9Cr 2Mn 65Mn 9Cr2Mn 65Mn 9Cr2Mn
Form of structure Double roller single press Double roller single press Double roller single press Double roller single press
Main shaft D:165mm forging steel D:250mm forging steel D:250mm forging steel D:250mm forging steel
Shape of final briquettes Round/square/hexagon/other shape by customizing the related molds.
Technical details:

1.The machine capacity depends on its execution, size and kind of material used

2.Briquette length can be altered by adjusting the machine and size.

3.Machine size/weights depends on press par/hopper and extra equipment