Plastic Machinery
| MODELS |
50 |
80 |
120 |
200 |
400 |
|
|
|
Screw
Diameter. mm L.D. Ratio Plasticizing Capacity - KG /Hr Screw Speed. Rpm. Heating Zones (Nos ) Injection Stroke. mm Maximum Shot.wt(p.s) |
30 18:1 18 200 3 4 115 70 |
35 18:1 25 200 4 6 125 100 |
40 18:1 30 200 4.5 8 150 150 |
45 18:1 35 200 5 8 200 250 |
55 18:1 45 200 6 10 275 450 |
 |
Mould
size plattens (inches) Clamping Stroke (mm) Max. Daylight opening. mm Max - Min. Mould Thick. mm Clamping Force |
8"
x 12" 175 300 100-200 50 |
10"
x 14" 200 350 125-225 80 |
12"
x 16" 350 650 150-300 100 |
14"
x 20" |
14"
x 20" 450 950 225-500 170 |
 |
Hyd. Pump motor H.P. Total Connecting load |
7.5 10.5 |
10 14 |
15 19.5 |
20 25 |
25 31 |
 |
Oil Tank Capacity (ltrs) Floor Space approx (feet) Weight (kg) |
50 8'x2.5'x5' 1750 |
50 10'x2.5'x5' 1750 |
50 13.5'x2.75'x6' 1750 |
50 18.5'x3.5'x6' 1750 |
50 20'x5'x6.5' 1750 |
