CONCRETE VIBRATOR
High Frequency Immersion Concrete Vibrator :
Super High Frequency Immersion Concrete Vibrator as per IS : 2505
: 1968 directly coupled with 4 mtrs., long flexible shaft and
with any one of the intercjangeable vibrating needles of size 25mm x 400mm,
40mm x 450mm and 60mm x 584 mm producing 12000 to 15000 vibration
per minute mounted on a 4-spring loaded disc base acting as
drip tray and 360 0 turn table with carrying handle.
Powered By :
MK-5 Villers Mark -12/2, 4 stroke Petrol or Petrol/Kerosene Engine
developing 1.9 B.H.P. at 3000 RPM.
MK-9 Villiers MArk-25, 4 stroke Petrol, Petrol/Kerosene Engine developing
3.4 B.H.P. at 2900/3000 RPM.
MK - 14 Greaves Lombardini Model - 520, vertical air cooled single
cylinder 4 stroke cycle Diesel Oil Engine capable of developing
4.4 B.H.P. at 3000/3600 RPM.
MK -17 2 H.P. 2850/3000 RPM. 440 volts, 3 phase, 50 cycles A.C.
Electric Motor with Push Button Starter and 10 ft. long Electric
Cable.
MK - 19 3 H. P. 2850/3000 RPM 440 volts, 3 phase, 50 cycles A.C.
Electric Motor with push Button Starter and 10'Ft. long Electric
Cable.
